Pod Point Not Charging, Green Flashing Light. How to Fix it?

Charging your EV at home is convenient, but what do you do when your Pod Point charger refuses to cooperate, displaying a perplexing green flashing light instead of providing the power your car needs?

In this article, we’ll explore the common reasons behind the Pod Point not charging issue with a green flashing light and guide you through a series of troubleshooting steps to get your charging station back on track.

Whether you’re a seasoned EV owner or a newcomer to the world of electric mobility, this article will help you understand and resolve this frustrating situation, ensuring that you’re back on the road with a fully charged battery in no time.

1. Charging Schedule or Timer

The green flashing light may indicate that a charging schedule or timer is active on your EV.

Some electric cars allow you to set specific times for charging to take advantage of off-peak electricity rates, which can delay the charging process until the scheduled time.


Check your car’s settings for any active charging schedules or timers. If you find a timer is set, consider adjusting it to allow for immediate charging or disable it if immediate charging is preferred.

Refer to your car’s user manual for guidance on how to configure or disable these settings.

2. Faulty Connection

A faulty connection between the charger and the electric vehicle (EV) is one of the most common reasons for the green flashing light. It can result from loose, damaged, or dirty connectors, which prevent the proper flow of electricity between the charger and the car.


To address this issue, start by ensuring that the charging cable is securely and properly connected to both the car’s charging port and the charger unit. Carefully inspect the connectors for any signs of damage or corrosion.

If you find any issues, such as bent pins or visible corrosion, these connectors may need to be repaired or replaced. Cleaning the connectors with a suitable electrical contact cleaner can also help improve the connection.

Important: EV battery replacement can cost $1000s. To avoid high-voltage battery replacement, there are some things you can do. Read this article to find out the 10 best ways to maximize EV battery life and save tons of money!

3. Dirty or Corroded Connectors

Dust, dirt, or corrosion can accumulate on the connectors, especially the pins, leading to poor electrical contact. This can disrupt the charging process and result in the green flashing light.


To address this issue, you should clean the connectors and pins on both the charger and the car. Use an appropriate electrical contact cleaner and a clean, dry cloth to gently remove any debris, dirt, or corrosion.

Ensure that the connectors are clean and free from any obstructions that might hinder a secure electrical connection. Regularly inspect and clean the connectors to prevent future charging issues.

Also read: EV Battery in Hot Temperature: 5 Things to Know

4. Communication Error

Sometimes, communication issues between the charger and the EV can lead to the green flashing light. This can be caused by software glitches, firmware incompatibility, or other technical problems.


First, try to resolve the issue by rebooting the car’s charging system. To do this, unplug the charging cable from both the car and the charger and then restart the car’s charging system.

This can sometimes clear up minor communication problems. If the problem persists, consider checking for firmware updates for both the car and the charger. Manufacturers often release updates to address compatibility issues.

If you’re unsure how to do this, contact your car’s manufacturer or the charger manufacturer for guidance.

5. Overcurrent Protection Triggered

Some charging stations have overcurrent protection mechanisms to prevent damage due to excessive power draw. If the charger detects that the current draw exceeds safe levels, it may trigger the green flashing light and halt charging.


Check the power settings on your charger and make sure it’s not set to a lower amperage than required for your specific car model. Consult your car’s manual or the charger manufacturer’s guidelines to determine the appropriate charging settings for your vehicle.

If the issue continues, it may be related to your electrical supply. Contact an electrician to assess your electrical infrastructure and ensure it can accommodate the charging demands of your EV without triggering overcurrent protection.


In any case, if the problem persists or if you’re unsure about any of the troubleshooting steps, it’s advisable to seek professional assistance.

Contact your EV manufacturer, the charger manufacturer, or a qualified electrician to diagnose and resolve the issue. It’s crucial to ensure safe and reliable charging for your electric vehicle.